Glovezilla
At Beeswift, we spend time developing and structuring amazing products, including our
new Glovezilla range.
Each glove comes with a retail ready header card. This strong robust card also adopts the same colour size chart
as the outer box and is 100% recyclable.
Each card also comes with its own barcode making it easy for the retailer
to add to their existing system. By adding a colour size chart it is easy to determine which size of Glovezilla glove
you are purchasing.
Easy to read titles on the front of the card, along with technical details for each glove, make
choosing the right product for the job simple.
Translation of the titles and technical information on the rear of
the card make this product perfect for the European markets.
As a company, we are continuing our efforts to ethically source products and reduce waste, whilst producing
products that are fit for purpose and ready to retail. Our outer boxes are all recyclable and we have reduced
our ink coverage.
13 Gauge Liner.
20% UHMW PE+ 80% rubber
100% TPE Fully Injection coating.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge Liner.
20% UHMW PE+ 80% rubber
100% TPE Fully Injection coating.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
Premium soft grain Leather.
Natural Coloured backing.
Half elastication to back of cuff.
Para-Aramid lining.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 4 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
Food Safe and washable.
Extremely high cut protection.
Suitable for general food preparation and areas where high cut protection is needed.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level F - TDM Cut Resistance (ISO 13997)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
100% Nitrile rubber coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
18 Gauge knit
Grey PU palm coating
UHMWPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level E - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
18 Gauge knit
Grey nitrile palm coating
HPPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level F - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
Premium Cowhide Split Leather
G-150gram Thinsulate and Micro Fleece
Nylon Cuff
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 3 - Tear Resistance
Level 4 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN 511:2006
Level 1 - Convective Cold Resistance
Level 3 - Contact Cold Resistance
Level X - Water Penetration
Premium goatskin Leather with reinforced stitching
Reinforced Para-aramid Lining
TPR back of hand protection
ARC Flash resistant ASTM F2675/F2675M 55cal/cm2
ARC Flash Heat attenuation factor 97.1%
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level E - TDM Cut Resistance (ISO 13997)
Level P - Impact Resistance
EN 407:2004
Level X - Burning Behaviour
Level 1 - Contact Heat
Level X - Convective heat
Level X - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal
40% polyester +60% Latex
High performance anti-vibration gloves
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level B - ISO 13997 Cut Resistance
EN10819:
Medium Frequency Spectrum "M" - 0.865 Pass
High Frequency Spectrum "H" - 0.598 Pass
Microfiber knitting
Single nitrile coating
18 gauge nylon
Breathable
Mixed spandex
Oil and wet resistance
High level abrasion resistance
EN 388: 2016
Level 3 - Abrasion
Level X - Cut Resistance
Level 2 - Tear Resistance
Level 1 - Puncture
Level A - ISO 13997 Cut Resistance
Para-Aramid 25.5, Steel 11%, Polyester 16.6%, Polycotton 46% Liner.
Latex palm Coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
15-gauge nylon liner
Fully coated with latex
Water resistant
Dry/wet grip
EN388: 2016
Level 2 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 1 - Puncture
Level A - ISO 13997 Cut Resistance
Double coated latex
13-gauge napped acrylic liner
Wet/dry grip
Extra cold resistance
EN388: 2016
Level 1 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 1 - Puncture
Level B - ISO 13997 Cut Resistance
EN 511: 2006
Level 1 - Convective Cold
Level 1 - Contact Cold
Level X - Water Permeability
EN 407: 2004
Level X - Burning Behaviour
Level 2 - Contact Heat
Level X - Convective heat
Level X - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal
HPPE 49%, Polyester 25%, Glass Fibre 12%, Steel 8%, Spandex 6% Liner.
100% Nitrile Rubber Coating
100% PVC TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
100% Sandy Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Orange Liner.
100% Sandy Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Green Liner.
100% Foam Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge Orange Liner.
45% UHMW PE + 30% nitrile + 25% rubber
100% Foam Nitrile Coating
100% TPR Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
)
13 Gauge, HPPE, Polyester, Glass Fibre Liner (Available in Green, Orange, Pink, Blue, and Red).
100% Foam Nitrile Coating
100% TPR Glow in the Dark Back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
)
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
100% Nitrile Rubber Coating.
100% PVC TPR back of hand protection.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Para-Aramid 71.2%, Steel 13.5%, Polyester 10.5%, Spandex 8% Liner.
100% Nitrile rubber coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 1 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Nitrile Foam coating
15 Gauge - Nylon and Polyester
Comfortable and breathable for prolonged periods when performing precision tasks
EN 388: 2016
Level 4 - Abrasion
Level X - Cut resistance
Level 3 - Tear resistance
Level 1 - Puncture
Level A - ISO 13997 Cut Resistance
Double coated nitrile offers water and oil resistance
Wet/dry grip
Washable and can be tumble dried (Follow instructions)
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 2 - Tear Resistance
Level 1 - Puncture
Level B - ISO 13997 Cut Resistance
EN 511: 2006
Level X - Convective Cold
Level 2 - Contact Cold
Level X - Water Penetration
Double coated nitrile
13-gauge HPPE/Glass Fiber/Spandex liner
Wet/dry grip
Offers fantastic oil and water resistance
Washable and can be tumble dried (follow instructions)
EN 388: 2016
Level 4 - Abrasion
Level X - Cut resistance
Level 4 - Tear resistance
Level 3 - Puncture
Level D - ISO 13997 Cut Resistance
Premium Grey split leather.
Heavyweight cotton backing and safety cuff.
Para-Aramid lining.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 4 - Puncture Resistance
Level E - TDM Cut Resistance (ISO 13997)
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass fibre 21.3%, Spandex 7.8% Liner.
100% PU Coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Premium goatskin Leather with reinforced stitching
Reinforced Para-aramid Lining
Thinsulate lined layer
ARC Flash resistant ASTM F2675/F2675M 56cal/cm2
ARC Flash Heat attenuation factor 95.7%
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
EN 407:2004
Level 4 - Burning Behaviour
Level 1 - Contact Heat
Level 3 - Convective heat
Level 2 - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal
EN 511:2006
Level X - Convective Cold Resistance
Level 3 - Contact Cold Resistance
Level X - Water Penetration
Sizes S-XL comes in boxes of 100 pieces.
Size XXL comes in boxes of 90 pieces.
Powder Free black textured Nitrile Gloves
CE category III
Excellent elasticity
Textured for added grip
7 mil
EN420: 2003 +A1:2009
EN 388:2016+A1:2018
Level 0 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 0 - Tear Resistance
Level 0 - Puncture Resistance
Level A - TDM Cut Resistance (ISO 13997)
EN 374-1:2016
EN 374-4: 2013
EN 374-5: 2016
Chemical - Breakthrough Time
n-Heptane(J) - More than 30 Mins (level 2).
Sodium Hydroxide 40%(K) - More than 480 Mins (level 6).
Additional Chemical Test
Ammonia 25% - More than 10 Mins (level 1).
Formaldehyde 37%- More than 480 Mins (level 6).
Hydrogen Peroxide 30% - More than 480 Mins (level 6).
FEATURES
Dependable grip, excellent flexibility and a comfortable ergonomic shape.
Puncture-resistant with latex coating
Lined with two layers of Titan Armour
Makes a great general-purpose work glove
ASTM F2878 14.4 newtons of puncture protection (hypodermic needle)
The protective area is on the palm side of the glove only
EN388: 2016
Level 2 - Abrasion
Level X - Cut Resistance (Coupe Test)
Level 4 - Tear Resistance
Level 4 - Puncture
Level F - ISO 13997 Cut Resistance
EN 407: 2004
Level X - Burning Behaviour
Level 2 - Contact Heat
Level X - Convective heat
Level X - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal
Please note: there is no European standard for needle resistance. Current industry practice is to utilize the American Standard ASTM F2878 as a guide, and to allow comparisons between different products. These products are not needle proof. Your own risk assessment therefore needs to be undertaken to decide the suitability of this product.
Premium goatskin Leather with reinforced stitching
Reinforced Para-aramid Lining
ARC Flash resistant ASTM F2675/F2675M 41cal/cm2
ARC Flash Heat attenuation factor 94.5%
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 3 - Tear Resistance
Level 3 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
EN 407:2004
Level 4 - Burning Behaviour
Level 1 - Contact Heat
Level 2 - Convective heat
Level 2 - Radiant heat
Level X - Small splashes of Molten Metal
Level X - Large splashes of Molten Metal