© 2023 Beeswift Limited

Peltor Ws Alert X Bluetooth Headset
Product Code: 3MMRX21A4WS6

3M™ PELTOR™ WS™ ALERT™ X Headset is a Bluetooth® headset with noise-cancelling boom microphone that connects to your mobile phone for hands free calls and streaming in noisy environments. The headset has a level-dependent function for ambient listening, and it syncs to a mobile app so users can easily set-up and adjust the headset

• Attenuating hearing protector comes in two models: headband or a safety helmet attachment (MRX21P3E4WS6)
• Bluetooth® technology for connection to an external Bluetooth® device allows for hands-free talking and streaming
• Noise-cancelling boom microphone for clear speech transmission in noisy environments
• Level-dependent function for ambient listening to help promote auditory situational awareness
• Connection to an iOS and Android compatible mobile app, 3M™ Connected Equipment, to more easily set-up and adjust the headset. The app is available to download from App Store and Google Play.
• Mobile app allows you to receive reminders when to change replacement cushions (hygiene kit) and choose the frequency of these alerts
• Replaceable cushions (hygiene-kit) and replaceable covers so you can change to your own choice of colour
• Push-to-Listen feature to listen to your surroundings easily and instantaneously
• Voice guided feedback after setting adjustment. No need to remove the headset for any adjustments
• The headset will automatically turn off after four hours of non-use to save battery life
• 2 x AA Alkaline Batteries (or optional NiMH rechargeables)
• Operating time: Approx. 78 hours (Bluetooth® streaming and level-dependent)

SNR 30 dB

Ear One Touch Pro Dispenser
Product Code: EAR1TPD

Conveniently provide hearing protection where employees need it. The 3M One Touch Pro Earplug Dispenser dispenses one earplug at a time with a simple twist. No more expense and waste of individually wrapped plugs. Made from ABS plastic with a powder-coated steel-back plate, it's designed for challenging environments indoors and outdoors.

• Accurately dispenses one earplug at a time
• Dispenses earplug directly into hand
• Durable ABS plastic for tough environments
• Free-standing or wall-mounted
• Shields earplugs from wind and rain
• Mounting holes designed to fit a variety of competitive dispensers
• Dispenser only

Peltor Optime I Headband
Product Code: H510A

• Optime I is very versatile protection, characterised by its lightness. Despite being so lightweight, it is the best imaginable protection.

• We have combined a low profile with generous inside depth. This makes it easy to team with other equipment and means that the ear rests comfortably.

• Optime I is the natural choice when you need to use all-round protection for both short and long spells.

• The wide, comfortable sealing rings are filled with a unique combination of fluid and foam, which gives optimum sealing and low contact pressure, ensuring the best possible comfort even during long periods of use.

• It is first-rate for use in environments with moderate industrial noise, such as workshops, sheet-metal shops and printing works, but can also be used to good effect outdoors, for instance when mowing the lawn or in connection with hobby and leisure activities.

• SNR 27dB, H=32dB, M=25dB, L=15dB

Peltor Optime Ii Neckband
Product Code: H520B

• Optime II has been developed for demanding noise-hazard environments and muffles even extremely low frequencies to a maximum degree.

• The sealing rings are filled with a unique combination of liquid and foam. The result is an optimum seal with low contact pressure, which provides snug comfort even during long-time use.

• The sealing rings have ventilation channels and are covered with soft, patterned, hygienic foil.

• Optime II is a suitable choice for environments with substantial industrial noise or construction machinery, airports and agricultural work.

• SNR=31dB, H=34dB, M=29dB, L=20dB

Peltor Optime 2 Helmet Attachment
Product Code: H520P3E-410-GQ

• Soft wide cushions helps reduce pressure around the ears and improves comfort and wearability
• Large space inside cup helps reduce moisture and heat build-up
• Easy to replace cushions and inserts helps keep them hygienically clean
• P3E Helmet attachment for helmet mounting


SNR = 31dB, H = 34dB, M = 28dB, L = 19dB

Peltor Optime 3 Helmet Attach
Product Code: H540P3E-413-SV

The PELTOR Optime III ear defenders are a high performance hearing protector and have been developed for use in extremely noisy environments. The protection is based on a technology with a double casing minimising resonance in the holder casing, maximising high-frequency attenuation.

SNR = 35dB, H = 40dB, M = 32dB, L = 22dB

The 3M PELTOR WorkTunes Pro Headset helps protect you from potentially harmful workplace noise while at the same time enjoy listening to the built in AM/FM radio. The built-in antenna, fast digital tuning and ability to store stations makes the hearing protector flexible and easy to work with.

Benefits
• Protect your hearing and listen to AM/FM radio at the same time with built-in antenna.
• Digital station search and voice guided menu system with announced frequencies
• 3.5 mm listen only stereo input (limited to 82 dB) for connection to external devices (e.g. mobile phone, radio, two-way radio and iPod)
• Auto power off turns headset off after 4 hours of non-use, to save energy and a low-battery warning informs you when to change batteries
• To reduce the corrosion caused by sweat the electronics are located in the outer part of the cup
• Store up to 5 stations on the headset
• 40 hours battery life

Peltor X1 Headband
Product Code: X1A

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X1A is a lightweight, low- profile earmuff designed for protection against low-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 22 dB. CSA Class A.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

Peltor X1p3 Helmet Attachment
Product Code: X1P3

The 3M Peltor X1 Ear Defenders are designed to offer protection against light industry noise. For example, grounds maintenance or power drilling.

• Slim-line cups for moderate attenuation that meets the needs of most industrial applications.
• Lightweight design.
• Simple colour coding: green, indicating the first level of attenuation within this range.

Attenuation: SNR=26dB, H=30dB, M=23dB, L=15dB

Peltor X2 Headband
Product Code: X2A

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X2A is a lightweight, lower-profile earmuff designed for protection against low-to-moderate level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 24 dB. CSA Class A.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

Peltor X2p3 Helmet Attachment
Product Code: X2P3

The 3M Peltor X2 Ear Defenders are designed to offer protection against moderate to high noise levels. For example, roadworks or construction.

• Slim-line cups for moderate to high attenuation that meets the needs of most industrial applications.
• Lightweight design.
• Simple colour coding: yellow, indicating moderate to high attenuation.

Attenuation: Helmet Attachment: SNR=30dB, H=33dB, M=28dB, L=19dB

Peltor X3 Headband
Product Code: X3A

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X3A features a newly designed spacer to help improve attenuation without the need for a much larger cup or double cup design. This lightweight earmuff is designed for protection against high-level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric"

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 28 dB. CSA Class AL.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

Peltor X3p3 Helmet Attachment
Product Code: X3P3

The 3M Peltor X3 Ear Defenders are designed to offer protection against high noise levels. For example, forestry or heavy engineering.

The 3M Peltor X3 utilises a newly designed spacer to help improve attenuation without the need for a double cup design, thus increasing the space inside the cup for greater comfort and wearability.
• High attenuation from a single cup design
• Light-weight and slim compared with similarly attenuating products.
• Simple colour coding: red indicating high attenuation.

Attenuation: Helmet Attachment: SNR=32dB, H=34dB, M=30dB, L=24dB

Peltor X4 Headband
Product Code: X4A

The X-Series earmuffs are 3M's latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X4A utilizes a newly designed spacer, specially formulated foam liners and innovative ear cushions to help improve attenuation. This lightweight, lower-profile earmuff helps with compatibility with other personal protective equipment and is designed for protection against moderate-to-high level industrial noise and other loud sounds. It features an electrically insulated wire headband, often referred to as "dielectric".

• The wire headband offers consistent pressure over prolonged wearing periods.
• Earcup pivot points tilt for optimum comfort and efficiency.
• Noise Reduction Rating (NRR)b 27 dB. CSA Class AL.

NOTE: The X-Series (over-the-head) headband version is electrically insulated - sometimes referred to as "dielectric". The metal components of the headband have been covered by non-conductive material for use in a low voltage electrical hazard (less than 440 V ac). As there are no applicable standards for testing ear muffs against electrical insulating properties, the product has been evaluated at an external laboratory against a modified test method based on EN397:1995. During assessment, the leakage current did not exceed 1.2mA when the external surface of the product made contact with an electrical source. The user must determine the overall suitability of this product for the intended application taking into account any hazards other than noise for which this product is tested.

The NRR may overestimate the hearing protection provided during typical use. 3M recommends reducing the NRR by 50% for estimating the amount of noise reduction provided.

Peltor X4 Helmet Attachment
Product Code: X4P3

The 3M Peltor X4 Ear Defenders are designed to offer protection against high noise levels, whilst maintaining a sleek, low profile, aesthetically pleasing design.

Historically, higher attenuating ear muffs meant large and bulky cups - but not anymore. The 3M Peltor X4 Ear Defenders can attenuate sound by as much as 32dB whilst maintaining a sleek, low profile, aesthetically pleasing design.

• Extremely slim and light-weight cups help to improve compatibility when used with other Personal Protective Equipment.
• New specially formulated damping pads and innovative foam contained in the sealing ring provide excellent acoustic protection, particularly against sounds dominated by low frequencies.
• Simple colour coding: bright green, indicating high attenuation combined with an extremely slim, lightweight design

Attenuation: Helmet Attachment: SNR=32dB, H=36dB, M=30dB, L=21dB

Peltor X5 Headband
Product Code: X5A

The 3M Peltor X5 Ear Defenders are designed to offer protection against extremely high noise levels. For example airports, quarrying or paper mills.

• Unparalleled attenuation (SNR 37dB) as a result of an optimum combination of specially formulated foam technology and a newly designed spacer and cup.
• Despite the larger cups the product remains relatively lightweight with excellent balance and wearer comfort.
• Simple colour coding: black, for extremely high attenuation in demanding environments.

Attenuation
Headband: SNR=37dB, H=37dB, M=35dB, L=27dB


Peltor X5p3 Helmet Attachment
Product Code: X5P3

The X-Series earmuffs are 3Ms latest advancement in hearing conservation. New technologies in comfort, design and protection all come together in this groundbreaking earmuff line. The X5A earmuffs offer the highest NRR (31 dB) for an earmuff on the market which makes them ideal for very high noise situations. The high attenuation delivered by X5A earmuffs is possible as a result of a combination of advanced technologies including: newly designed spacers, specially formulated earcup liners and innovative foam contained in the cushions. It features an electrically insulated wire headband, often referred to as ?dielectric?.

• Replaceable ear cushions and foam liners (hygiene kit HYX5).
• Noise Reduction Rating (NRR)b 31 dB. CSA Class AL.

SNR=36dB, H=36dB, M=34,dB, L=26dB

  • 17 Products