Glovezilla
At Beeswift, we spend time developing and structuring amazing products, including our
new Glovezilla range.
Each glove comes with a retail ready header card. This strong robust card also adopts the same colour size chart
as the outer box and is 100% recyclable.
Each card also comes with its own barcode making it easy for the retailer
to add to their existing system. By adding a colour size chart it is easy to determine which size of Glovezilla glove
you are purchasing.
Easy to read titles on the front of the card, along with technical details for each glove, make
choosing the right product for the job simple.
Translation of the titles and technical information on the rear of
the card make this product perfect for the European markets.
As a company, we are continuing our efforts to ethically source products and reduce waste, whilst producing
products that are fit for purpose and ready to retail. Our outer boxes are all recyclable and we have reduced
our ink coverage.
13 Gauge Liner.
20% UHMW PE+ 80% rubber
100% TPE Fully Injection coating.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
13 Gauge Liner.
20% UHMW PE+ 80% rubber
100% TPE Fully Injection coating.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 3 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
Level P - Impact Protection
Premium soft grain Leather.
Natural Coloured backing.
Half elastication to back of cuff.
Para-Aramid lining.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 4 - Puncture Resistance
Level D - TDM Cut Resistance (ISO 13997)
HPPE 47.4%, Polyester 20.1%, Glass Fibre 17.2%, Steel 14%, Spandex 1.3%.
Food Safe and washable.
Extremely high cut protection.
Suitable for general food preparation and areas where high cut protection is needed.
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level F - TDM Cut Resistance (ISO 13997)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)
HPPE 40.9%, Nylon 14.1%, Polyester 15.9%, Glass Fibre 21.3%, Spandex 7.8% Liner.
100% Nitrile rubber coating.
Ventilated back.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications
EN 388:2016+A1:2018
Level 4 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 4 - Tear Resistance
Level 2 - Puncture Resistance
Level C - TDM Cut Resistance (ISO 13997)
18 Gauge knit
Grey PU palm coating
UHMWPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level E - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
18 Gauge knit
Grey nitrile palm coating
HPPE liner
Comfortable ergonomic fit
EN388: 2016
Level 4 - Abrasion
Level X - Cut Resistance
Level 4 - Tear Resistance
Level 2 - Puncture
Level F - ISO 13997 Cut Resistance
Foodsafe (Except for fatty foods)
100% Para-Aramid Liner.
Lightweight for maximum dexterity and comfort with sensitivity.
Suitable for general assembly handling and engineering applications.
EN 388:2016+A1:2018
Level 1 - Abrasion Resistance
Level X - Cut resistance (Coupe Test)
Level 2 - Tear Resistance
Level 3 - Puncture Resistance
Level B - TDM Cut Resistance (ISO 13997)
EN ISO 11612: 2015
A1 - Limited Flame Spread (Method A)
F2 - Contact Heat (250C for between 10 to 15 Seconds)